• ea-507.l
    EA Rotary Table EA rotary tables have one spindle (4th axis). Our single-spindle rotary tables (4th axis) are compact, flexible and can be installed in almost any machining center. The better accessibility of the rotary tables ensures a stable machining process and higher machining capacity. The smaller the rotary tables for the needed for the particular range of parts, the more energy-efficient it is. This results from the smaller moving masses.
    Details
  • m2-510.l
    M rotary tables have one axe (4th axis) with multi-spindles for 2 to 4 working pieces. Multi-spindle rotary tables from pL Lehmann permit simultaneous machining of different spatial angles as well as multi-side machining at every station. Maximum flexibility during continuous use make our rotary tables cost-effective, since high output can be achieved with little effort. Our rotary tables are characterized by high angular accuracy in conjunction with minimal radial and axial run-out. Our multi-spindle rotary tables offer you the best possible solution even for difficult workpiece clamping situations.
    Details
  • tf-507510.ll_fix
    TF rotary tables / dividing heads are 2-axis tables (4th + 5th axis) and have one spindle for one working piece. TF-type rotary tables (4th + 5th axis) are single-spindle, cantilevered dividing heads without a counter bearing and are especially well-suited for small workpieces with a cube size of approx. 100 mm to max. 250 mm. Our dividing heads offer good accessibility for the smallest parts, making them ideal for machining of watch cases, medical device parts, dental implants and other small parts. Difficult-to-machine materials are processed especially precisely with our dividing heads. Even when carburetors, turbines and similar parts are involved, our dividing heads are known for high machining capacity per unit time. Low-vibration clamping and machining are assured.
    Without counter bearing ("flying")
    • Small workpieces (up to cubes of approx. 100 mm, max. 250 mm)
    • Amongst other things, ideal for the machining of watch cases, medical engineering parts, dental implants, small parts for carburetors, turbines etc.
    Details
  • t1-507510.ll_variox1
    T1 rotary tables are 2-axis tables (4th + 5th axis) with one spindle for one working piece. Single-spindle, 2-axis table (4th + 5th axis) with clamped counter bearing is one of over 20 standardized systems available within our product range. Our technical performance data for rotary tables cover a wide range of applications. This 2-axis table is well-suited for small to medium-sized workpieces with a cube size of approx. 350 mm. The 2-axis table is ideal for machining automotive, aircraft and turbine parts as well as for general machining tasks. After all, maximum adaptability is required in contract manufacturing as it is no where else. This 2-axis rotary table, manufactured using superior technology, can largely fulfill you requirements for an all-rounder. With counter bearing, clamped
    • Small to medium-sized workpieces (up to cubes of approx. 350 mm)
    • Amongst other things, ideal for the machining of automotive, airplane and turbine parts as well as for general mechanical engineering
    Details
  • t2-510520.ll_fix
    T2/T3 rotary tables are 2-axis tables (4th + 5th axis) for one or more working pieces. These 2-axis tables, equipped with a clamped counter bearing, are well-suited for simultaneous clamping and machining of 2 to 3 workpieces. The 2-axis tables are ideal for machining of automotive, aircraft and turbine parts as well as for general machining tasks. With a high machining capacity per unit time, these 2-axis rotary tables permit the shortest possible tool lengths and shortest possible clamped workpieces for maximum rigidity. They impress with their low-vibration clamping and high-precision machining. Even difficult workpiece clamping configurations are possible with these 2-axis tables, which are just another standard product from us. With counter bearing, clamped
    • For simultaneous clamping / machining of two or three workpieces
    • Amongst other things, ideal for the machining of automotive, airplane and turbine parts as well as for general mechanical engineering
    Details
  • 1-1-13
    Details
  • 1-1-6
    Details
  • floating-chuck
    Details
  • High Precision Clamping System
    • Continous repeatability of high precision system runout • Superior clamping force versus other precision clamping systems • Collet Locking-System (pat. pend.) retains collet in nut for easier assembly • Total system runout ≤3µm at 3xD • Increases tool life with precise runout • High flexibility by usage of collets with different clamping diameters • Low noise due to slotless clamping nut
    Details
  • powRgrip-System
    Details
  • 1-1-11
    Details
  • 1-1-17
    Details
  • mpm-1-1-1
    • High precision
    • Easy operation
    • For 1+2-plane Balancing
    • Balancing methods: gramm, degree, split angle, drilling axial and radial, milling, fixed position.
    • Display in: gmm, gramm, quality grade
    • Rotor weight up to approx. 20kg
    • Rotor-Ø up to 270mm
    • Rotor length up to approx. 400mm
    • Immediately ready to use
    • Weight approx. 45kg only
    Details
  • 16
    • We offer you standard angle heads as well as specialty heads developed specifically for your manufacturing requirements. BENZ angle heads will help you:
      • Reduce machine downtimes
      • Machine complex parts, even when the space is normally inaccessible (internal machining)
      • Optimize machining cycles
      • Reduce the amount of having to re-position work pieces to a minimum
    Details
  • 10
    • We offer you standard angle heads as well as specialty heads developed specifically for your manufacturing requirements. BENZ angle heads will help you:
      • Reduce machine downtimes
      • Machine complex parts, even when the space is normally inaccessible (internal machining)
      • Optimize machining cycles
      • Reduce the amount of having to re-position work pieces to a minimum
    Details
  • 15
    • We offer you standard angle heads as well as specialty heads developed specifically for your manufacturing requirements. BENZ angle heads will help you:
      • Reduce machine downtimes
      • Machine complex parts, even when the space is normally inaccessible (internal machining)
      • Optimize machining cycles
      • Reduce the amount of having to re-position work pieces to a minimum
    Details
  • 11
    • We offer you standard angle heads as well as specialty heads developed specifically for your manufacturing requirements. BENZ angle heads will help you:
      • Reduce machine downtimes
      • Machine complex parts, even when the space is normally inaccessible (internal machining)
      • Optimize machining cycles
      • Reduce the amount of having to re-position work pieces to a minimum
    Details
  • 44
    The TOOL MASTER Quadra is the compact tool presetting device directly for production. Technical data
    • Measurement device / PC connection via USB cable.
    • Inspection light as standard with1 LED (EyeRay®).
    • Weight balance with tried and tested roller springs.
    • Measurement system by Sylvac of Switzerland.
    • Standard spindle, patented needle bearing.
    • Ergonomically positioned hand wheels for fine adjustment.
    • Simple table as part of the device.
    Details
  • 47
    The TOOL MASTER 5 is a universal tool presetting device used directly in production for large tools. Technical data
    • 12 V supply voltage for control of the fine adjustment and the pneumatics for the spindles
    • Motorised axles
    • Air control unit
    • Standard spindle: needle bearing, KV spindle optional
    • Ergonomically positioned joystick for fine adjustment
    • Selective axle clamping
    • A tool cabinet is also optionally available
    Details
  • 21
    • Shrink Range Ø 3 – 20 mm for carbide shanks
    • and Ø 6 – 20 mm for HSS shanks
    • • Max. shrink extension 400 mm
    • • Max. cooling extension 160 mm
    • • Operator does not have any contact with hot tools
    • • All tool nose contours may be used
    • • Integrated water cooling
    • • Generator in a "Black Box" for easy replacement by end users
    Details
  • 19
    • Shrink range Ø 3 – 16 mm for carbide shanks
    • To shrink all TER shrink collet sizes and diameters
    • • Easy shrink process by push of one button
    • • Hand operation of the coil
    • • Patented Shrinking process
    • • Coil allows interchangeable discs for effective shrinking of tool holders and TER collets
    Details
  • Polish Carbide Ball
    Polished Carbide BAll
    Details
  • 2XDCS
    Designed for high performance drilling in a broad range of materials.
    Details
  • 39
    Micro drills are manufactured in up to 3 different flute lengths, depending on diameter.
    Details
  • DIXI - 1130 R Twist Drills
    Details
  • DIXI - 1712R Micro Cutting Taps
    Details
  • 54
    High precision power chucks Ø 125 - 400 mm
    • closed center
    • 2 and 3 jaws (4 jaws only Ø 400 mm)
    Details
  • 57
    High precision pull-down chucks Ø 170 - 650 mm
    • active pull-down
    • tongue & groove
    • 3 jaws
    Details
  • 55
    High precision power chucks Ø 130 - 450 mm
    • LARGE THROUGH HOLE
    • 2, 3 and 4 jaws
    Details
  • 56
    Quick jaw change power chucks Ø 140 - 630 mm
    • LARGE THROUGH HOLE
    • high speed
    • high flexibility: jaws radially adjustable/reversible
    • 3 jaws
    Details
  • 36
    • Recommended for general purpose reaming in most materials. • Straight flutes. • Well suited for ferrous metals and many non-ferrous and non-metallic materials. • Special sizes, shank diameters, flute lengths, step reamers, coating, etc. available as specials.
    Details
  • 1
    • Single Flute Gundrills
    • Specification solid drilling tools, counteboring tools, trepanning tools
    Details
  • 4
    • Deep Hole Drilling Tools
    • Specification new: from dia. 12.000 mm insert with serration
    Details
  • 33
    This is the original single flute countersink designed for general purpose countersinking, chamfering or deburring. • Self piloting and completely chatterless. • No secondary burs formed. • Each size may be used on a wide range of hole diameters. • Use on machine tool or in handheld tool applications. • Easily resharpened. • Tin coating for higher hardness and increased lubricity.
    Details
  • 9gressel
    Approved high-pressure clamping system Mechanical machine vice with continuous force adjustment. 10% to 100% of the clamping force with only 1 rotation of the hand crank and always the same final crank position. Quick adjustment of the clamping range using locking pins
    Details
  • 63
    Standard line includes:
    • safety valve
    • stroke control (without proximity switch)
    • port for compressed air
    • central lubrication grease, oil or oil + air
    • swarf guard
    Details